The Point Two motorcycle jacket uses the CE certified air cushion system. In the event of an accident and the rider is thrown from the motorcycle, the air cushion instantly inflates within 0.1 seconds around the neck, 0.2 seconds around the coccyx and 0.25 seconds for the entire jacket to inflate. Activation is simple and automatic, a coiled wire is attached to both the motorcycle and the jacket. Once the rider and the motorcycle are separated, the coiled wire pulls a "key" out of a C02 release system and the C02 inflates the air cushion. The inflated jacket provides the necessary impact and safety protection. After a few seconds the air is automatically released through the release valve.
The Point Two jacket looks stylish and feels comfortable, as well as providing the rider with the protection of the latest safety technology. A coiled wire, which is secured to the motorcycle, is fastened to the jacket's "quick release" button which will activate the airbag system if and when needed.
The Point Two jacket looks stylish and feels comfortable, as well as providing the rider with the protection of the latest safety technology. A coiled wire, which is secured to the motorcycle, is fastened to the jacket's "quick release" button which will activate the airbag system if and when needed.
STEP 1
Unscrew the used C02 cartridge by turning anti clockwise.
Unscrew the used C02 cartridge by turning anti clockwise.
STEP 2
Remove all the remaining C02 from the jacket by pressing down with your hands and slowly pushing out.
DO NOT fold or roll as this may cause internal damage.
Remove all the remaining C02 from the jacket by pressing down with your hands and slowly pushing out.
DO NOT fold or roll as this may cause internal damage.
STEP 3
Insert a “setting bolt” into the hole at the bottom of the “key box” and tighten up by hand.
Insert a “setting bolt” into the hole at the bottom of the “key box” and tighten up by hand.
STEP 4
Then tighten further with the allen key provided until the hole for the “key ball” with a ring in the aluminium cylinder is placed at the centre of the hole of the “key box”.
Then tighten further with the allen key provided until the hole for the “key ball” with a ring in the aluminium cylinder is placed at the centre of the hole of the “key box”.
STEP 5
Insert the “key ball” with the ring into the hole of the “key box”
Insert the “key ball” with the ring into the hole of the “key box”
STEP 7
Place a new C02 cartridge into the “key box” by screwing it in until it will go no further.
Place a new C02 cartridge into the “key box” by screwing it in until it will go no further.
